4
Getting started
En
1
Make sure that the camera’s power
switch is set to OFF.
2 Push the battery compartment lock
slightly towards and open the
battery compartment cover.
3 Load and push the battery in until
it is locked by the battery lock.
4 Close the battery compartment
until a click is heard.
Unloading the battery
Press the battery lock to unlock and
remove the battery.
Loading the battery
Power switch
2
Battery compartment
lock
Battery
compartment
cover
3
Direction
indicating mark
Battery lock
2
1
Battery
compartment
cover
s003_En-Fr-Es-De.book Page 4 Tuesday, December 27, 2005 4:34 PM
To Next Page
Loading...
