Olympus E-330 - Evolt E330 7.5MP Digital SLR Camera - Attaching Lens and Strap

5
Getting started
En
1
Remove the body cap from the camera and the rear cap from the
lens.
2 Align the lens attachment mark
(red) on the camera with the
alignment mark (red) on the
lens, then insert the lens into
the camera’s body. Rotate the
lens clockwise until you hear it
click.
3 Remove the lens cap.
Removing the lens from the camera
While pressing the lens release
button, remove the lens from the
camera by rotating it
counterclockwise.
• For usable lenses, gADVANCED MANUAL (P. 187).
Attaching a lens to the camera
1
2
Rear cap
1
2
Body cap
1
2
Lens attachment mark (Red)
Alignment
mark (Red)
Lens cap
2
1
L
ens re
l
ease
b
utton
s003_En-Fr-Es-De.book Page 5 Tuesday, December 27, 2005 4:34 PM