Olympus FL-300R - Wireless Remote Control

12 EN
Wireless remote control fl ash photography
Wireless remote control fl ash photography
1
Set the RC switch to A or B.
A and B are the group settings. Set the fl ash control mode, etc. to each groups and
control them wirelessly.
2
Set [# RC Mode] to [On] in the menu of the camera to make the fl ash on the
camera ready to fi re.
3
Set the fl ash control mode, etc. in each of the groups A and B on the camera.
Flash intensity value
250250 F5.6
0.0
0.0
P
3838
A Mode
TTL
M
Off
+5.0
TTL +3.0
1/8
–
LO
1
Ch
Group
Select the fl ash
control mode and
adjust the fl ash
intensity individually.
For MANUAL, select
the fl ash intensity.
•
Normal fl ash/Super FP fl ash
Super FP fl ash is not compliant.•
Communication light level
Set the communication light level to
[HI], [MID], or [LO].
•
Channel
Be sure to set the channel
to [1].
•
Flash
intensity
Flash control
mode
•
bookR2190Unified.indb12bookR2190Unified.indb12 2011/03/2111:25:022011/03/2111:25:02