Olympus FL-900R - Using the Bounce Adapter; Using the IR Filter

Using the Bounce AdaP-ter
Attaching the supplied
bounce adapter diffuses the light
from the flash over a
wider area for softer bounce
lighting.
• Insert
the tabs on the interior
of
the bounce adapter into the matching slots
on
top
of
the flash and attach the adapter as shown.
·
· •
Attaching the adapter reduces flash
output.
•
To
remove the adapter, pull
the tab on the bottom toward you
as shown.
Using the
IR Filter
Attach the
IR filter
when using the flash to control
other units
in
RC
mode.
• Insert the tabs on the interior
of
the
IR filter
into the matching
slots on top
of
the
flash and attach the filter
as shown.
•
To
remove the filter, pull
the
tab on the bottom toward you as
shown.
33
EN