To Next PageTo Next Page
Need help?Do you have a question about the Olympus MACRO FLASH SYSTEM and is the answer not in the manual?
General| Flash Modes | TTL, Manual |
|---|---|
| Power Source | 4 x AA batteries |
| Compatibility | Olympus OM-D and PEN cameras |
| Guide Number | 10 |
| Type | Macro |
Explains hazard symbols and precautions for safe product use, including DANGER, WARNING, and CAUTION.
Provides compliance information for European, US, and Canadian regulations, including FCC notices.
Details best practices for using and storing the flash system to prevent damage from environmental factors.
Guidelines for battery selection, insertion, and safe handling to prevent leaks, overheating, or damage.
Verifies that all included parts and accessories for the Macro Flash System are present in the package.
Identifies which Olympus cameras and Zuiko lenses are compatible with the macro flash system.
Illustrates and names the FC-1 controller parts, and describes the system's carrying case.
Step-by-step guide on how to insert batteries into the FC-1 Macro Flash Controller correctly.
Instructions for securely attaching and removing the FC-1 controller to a camera's hot shoe.
Steps for connecting the RF-11 Ring Flash to the lens and FC-1 controller.
Procedure to check battery charge and select between TTL AUTO and MANUAL modes for the RF-11.
Explains the functions of the built-in illuminators for modeling, AF assist, and red-eye reduction.
Explains how to use the TTL AUTO mode for automatic flash exposure measurement with the RF-11.
How to adjust the flash output intensity manually for finer exposure control on the RF-11.
Explains how to set manual flash output levels for precise lighting control with the RF-11.
Charts showing the RF-11 flash's effective range with different lenses and settings.
Steps for mounting the TF-22 Twin Flash to the lens and FC-1 controller.
Procedure to check battery charge and select between TTL AUTO and MANUAL modes for the TF-22.
Instructions for adjusting TF-22 flash head angles and using illuminator functions.
Covers TTL AUTO mode, adjusting flash light ratio, and MANUAL mode operation for the TF-22.
Instructions for using the diffuser and understanding light control ranges for the TF-22.
Allows users to customize flash settings like illuminator, timer, and display modes.
Resets settings to default and lists warning displays with remedies for system issues.
Specifies the maximum number of continuous flashes before requiring a cool-down period.
Information on optional accessories like adapter rings and external power supplies.
Answers to common questions regarding flash operation, connectivity, and troubleshooting.
Provides detailed technical specifications for the flash controller, Ring Flash, and Twin Flash.
