EasyManua.ls Logo

Olympus UFL-1 - User Manual

Olympus UFL-1
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
©2007
Printed in China
http://www.olympus.com/
VS061801
UFL-1
UFL-1 Instruction Manual
UFL-1_1-4.fm Page 1 Friday, February 23, 2007 4:50 PM
Question and Answer IconNeed help?

Do you have a question about the Olympus UFL-1 and is the answer not in the manual?

Olympus UFL-1 Specifications

General IconGeneral
BrandOlympus
ModelUFL-1
CategoryCamera Flash
LanguageEnglish

Summary

SAFETY PRECAUTIONS

Electrical Hazards Warning

Warns about high voltage circuits, short circuits, and potential burns.

Fire and Explosion Hazards

Warns against using the product in explosive atmospheres.

Eye Safety and Child Protection

Advises against flashing eyes, especially for children, and keeping away from them.

Water Immersion and Damage Handling

Instructions for when the product gets wet or is damaged, and electrical shock risks.

Storage and Usage Environment Warnings

Warns against storing in humid/dusty locations and covering the light emitter.

Environmental and Handling Precautions

Avoid extreme temperatures, vibrations, and rough handling to prevent damage or water leakage.

Battery Handling Dangers (Fire;Explosion)

Critical warnings about heating, incinerating, shorting, and storing batteries improperly.

Battery Handling Dangers (Electrical)

Warns against connecting batteries to power sockets and handling wet batteries.

Battery Leaks and Malfunction Warnings

Advises keeping batteries dry, not touching with wet hands, and proper insertion.

Battery Mixing and Charging Prohibitions

Prohibits mixing battery types, charging non-rechargeable batteries, and using damaged batteries.

Battery Leak and Overheating Precautions

Actions for battery leaks, hot batteries, and contact with battery fluid.

About O-ring

Handling the product

Prohibited Cleaning Chemicals

Lists specific chemicals that should not be used for cleaning to prevent product damage.

2. Maintaining the Waterproof Function

Applying O-ring Silicone Grease

Instructions on applying silicone grease to the O-ring for lubrication and sealing.

Correct O-ring Installation

Steps for correctly fitting the O-ring into its groove to maintain waterproofing.

3. Inserting the Batteries

Battery Insertion Procedure

Step-by-step guide on how to properly insert batteries, including O-ring checks.

4. Mounting the Flash

5. Taking a Picture

Flash Modes: TTL and Manual Operation

Explains how to set and use the flash in TTL Auto and Manual shooting modes.

6. Handling After Shooting

Cleaning Flash After Saltwater Use

Instructions for rinsing the flash with pure water, especially after use in salt water.

7. Appendix

Flash Usage and Storage Cautions

Advises on avoiding specific locations and instances that can damage the flash.

Causes of Water Entry into Flash

Lists common reasons for water leakage into the flash unit.

Related product manuals