UNLOADING THE
CARTRIDGE FILM
The film will be rewound
automatically when the end of
the roll is reached.
• Wait until the sound of the motor
operation stops and starts blinking
in the exposure counter. Then open
the cartridge cover and remove the
cartridge. While the motor is
operating, the cartridge cover is
locked. When the motor stops
operating, press the cartridge cover
release button. The cartridge visual
exposure indicator will be set to
(exposed).
Rewinding the film before the
end of the roll
Press the mid-roll rewind button
gently with your fingernail, etc.
Caution: Do not use an instrument
with a sharp tip.
29
To Next Page
Loading...
