USING THE FLASH MODES
Select the flash mode
according to your shooting
conditions and needs.
Press the flash mode button. The
selected flash mode is displayed
on the LCD panel.
Notes:
• The flash strength is automatically
controlled to prevent pictures from
being overexposed even when the
subjects are close.
• The flash also functions as an
autofocus auxiliary light in low-light
conditions. When the shutter release
button is pressed halfway, the flash
blinks several times. When the button
is pressed down all the way, the main
flash fires. Be sure to hold the camera
firmly until the flash fires.
33
To Next Page
Loading...
