Olympus LS-3 User Manual

18
1
EN
Power supply
Power supply
will be changed depending on the
remaining amount and the state of
batteries.
Connect to the USB connecting AC
adapter (optional) to charge
It can be charged by connecting to the USB
connecting AC adapter (A514) (optional).
1 Plug the recorder’s USB cable
into the AC adapter.
3 While the recorder is during
stop mode or turned off,
connect the USB cable to the
connecting terminal on the
bottom of the recorder.
• While [Press OK to start charging] is
flashing, press the `OK button.
5 Charging is completed when
[Battery Full] is displayed.
4 Press the ` OK button to start
charging.
• Before connecting the AC
adapter, switch the USB
connection setting to
[AC Adapter] (☞ P.73).
• Before connecting the USB
cable, exit HOLD mode (☞ P. 21).
2 Plug the AC adapter into AC
outlet.
To the USB
connecting AC
adapter’s (A514)
USB connector
To the
AC outlet
To the USB
connector
Notes
• The recorder cannot be charged when
the PC is not turned on. It may not also
be charged when the PC is in standby,
hibernate, or sleep mode.

Olympus LS-3 Specifications

General

Brand	Olympus
Model	LS-3
Category	Voice Recorder
Language	English