21
1
EN
HOLD
If you set the recorder to HOLD mode, the running conditions will be preserved, and all
buttons will be disabled. This feature is useful when the recorder has to be carried in a bag or
pocket. This mode can also prevent you from accidentally stopping recording.
Set the recorder to HOLD mode
Slide the POWER/HOLD switch to
the [HOLD] position.
• After [Hold] appears on the display, the
recorder is set to HOLD mode.
Notes
• If you press any button in HOLD mode, the clock display lights for 2 seconds, but it will not
operate the recorder.
• If HOLD is applied during playback (recording), operation is disabled with the playback
(recording) state unchanged (When playback has ended or the recording has ended due
to the remaining memory being used up, it will stop).
• The recorder can be effectively operated via the exclusive remote control set RS30W
(optional), even when it is in HOLD mode.
HOLD
Exit HOLD mode
Slide the POWER/HOLD switch to
the A position.
To Next Page
Loading...
Need help?
General
