7
Troubleshooting
109
EN
Troubleshooting
Problem Possible cause Solution
Unable to connect with a
Bluetooth device.
LS-P2 model only
The Bluetooth device to be
connected is not in a connectable
state.
Make the Bluetooth device connectable
and then try configuring the settings again
(☞ P. 92).
The distance between the
Bluetooth device and voice
recorder is too far or there is an
obstruction between them.
Place the Bluetooth device within 1 m of
the voice recorder and then try configuring
the settings again (☞ P. 92).
The pairing information has been
deleted.
Perform pairing setting again (☞ P. 92).
Noise is output when
a Bluetooth device is
used.
LS-P2 model only
The distance between the
Bluetooth device and voice
recorder is too far or there is an
obstruction between them.
Use the device close to the voice recorder.
* LS-P1 model only.
To Next Page
Loading...
