Olympus LS-P1 - Lcd;Sound Menu [Lcd;Sound Menu]; Setting the Backlight [Backlight]; Adjusting the Contrast [Contrast]; Setting the LED Indicator Light [LED]

4
LCD/Sound menu [LCD/Sound Menu]
66
EN
LCD/Sound menu [LCD/Sound Menu]
Setting the backlight [Backlight]
The display backlights are switched on for
a preset amount of time when a button
operation is performed.
[5 sec.], [10 sec.], [30 sec.], [1 min.]:
Set the amount of time that the
backlight stays lit.
[Off]:
Disables the backlight.
Adjusting the contrast [Contrast]
You can adjust the contrast of the display to
12 different levels.
• The setting can be adjusted to between
[01] to [12].
Setting the LED indicator light
[LED]
You can set the LED indicator light to not
become lit.
[On]:
LED indicator light is switched on.
[Off]:
LED indicator light stays off.
TIP
• Even if you set the [LED] setting to
[Off], the LED indicator light will
flash while files are being transferred
between the voice recorder and a PC.
Turning beeping sound on/off
[Beep]
The voice recorder makes beeping sounds
when buttons are pressed, or to warn in case
of operation errors. You can select whether
the voice recorder makes these beeping
sounds.
[On]:
Enables beeping sounds.
[Off]:
Disables beeping sounds.
Changing the display language
[Language]
You can select the language used in the voice
recorder’s displays.
• [Čeština] , [Dansk], [Deutsch],
[English], [Español], [Français],
[Italiano], [Nederlands], [Polski],
[Русский], [Svenska], [繁體中⽂].
TIP
• The language selections vary
depending on where the voice recorder
was purchased.