Olympus µ 1060 - Flash and Exposure Adjustment; Flash Settings; Exposure Compensation

21EN
Using the fl ash
The fl ash functions can be selected to best match
the shooting conditions and render the desired
image.
1
Press the # button.
P
OKOK
AUTO
SET
FLASH AUTO
AUTO
!
#
$
2
Use 34 to select the setting option,
and press the  button to set.
Item Description
FLASH AUTO
The fl ash fi res automatically in low-
light or backlight conditions.
REDEYE
Pre-fl ashes are emitted to reduce the
occurrence of red-eye in your photos.
FILL IN
The fl ash fi res regardless of the
available light.
FLASH OFF The fl ash does not fi re.
Adjusting the brightness
(Exposure compensation)
The exposure value automatically set by the
camera can be adjusted brighter or darker to obtain
a desired shot. This function is not available in the
h
shooting mode.
1
Press the F button.
0.0
0.0
+0.3
+0.3
+0.7
+0.7
+1.0
+1.0
EXPOSURE COMP.
Exposure compensation value
2
Use
1234
to select the image
showing the desired brightness, and
then press the  button.
bookmyu1060SWenA.indb21bookmyu1060SWenA.indb21 2008/07/0120:46:392008/07/0120:46:39