Olympus µ 1060 - Using OLYMPUS Master 2 Software; Software Installation and Connection; Starting and Operating the Software

56 EN
Using OLYMPUS Master 2
Windows
After the computer detects the camera, a
message indicating the success of the operation
will appear. Confi rm the message by clicking
"OK."
The camera is recognized as a removable disk.
Macintosh
When iPhoto started, exit iPhoto and start
OLYMPUS Master 2.
While the camera is connected to the
computer, shooting functions are disabled.
Connecting the camera to a computer via a
USB hub may cause unstable operation.
When [MTP] is set for the submenu that
appears by pressing 4 after selecting [PC]
in Step 3, images cannot be transferred to a
computer using OLYMPUS Master 2.
Starting OLYMPUS Master 2
1
Double-click the OLYMPUS Master 2
icon.
Windows
appears on the desktop.
Macintosh
appears in the OLYMPUS Master 2 folder.
Browse window appears after starting the
software.
When OLYMPUS Master 2 is started for the
fi rst time after installation, "Default Settings"
and "Registration" screens will appear. Follow
the instructions on the screen.
●
System requirements and
installation of OLYMPUS
Master 2
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting the camera to a
computer
1
Make sure the camera is turned off.
The monitor is off.
The lens is retracted.
2
Connect the camera to a computer.
The camera automatically turns on.
EASY PRINT
USB
SET
OK
EXIT
CUSTOM PRINT
PC
Connector cover
USB cable (supplied)
Multi-connector
Locate the position of the USB port by referring
to your computer’s instructions manual.
3
Use
12
to select [PC], and press
the  button.
The computer automatically detects the camera as a
new device on the fi rst connection.
●
●
●
●
bookmyu1060SWenA.indb56bookmyu1060SWenA.indb56 2008/07/0120:47:052008/07/0120:47:05