Olympus µ 1060 - Image Erasure and Print Settings; Erasing Images and Print Orders

41EN
Refer to "Using the Menu" (p. 3) when adjusting the settings of these functions.
Erasing images [S ERASE]
S ERASE
Before erasing, check that no important data is
left in the internal memory or card.
Submenu 1 Application
SEL. IMAGE
Images are individually selected and
erased.
ALL ERASE
All images in the internal memory or
card are erased.
To individually select and erase images
[SEL. IMAGE]
1 Use 12 to select [SEL. IMAGE], and
press the  button.
2 Use 1234 to select the image to be
erased, and press the  button to add a
R mark to the image.
1
4
2
5
3
6
IN
OK
S
MENU
BACK GO
SEL. IMAGE
R mark
3 Repeat Step 2 to select the images to be
erased, and then press the S button to
erase the selected images.
4 Use 12 to select [YES], and press the 
button.
The images with a R mark are erased.
To erase all images [ALL ERASE]
1 Use
12
to select [ALL ERASE], and press
the  button.
2 Use 12 to select [YES], and press the
 button.
●
Saving print settings to the image data
[< PRINT ORDER]
< PRINT ORDER
“Print reservations (DPOF)” (p. 53)
Print reservation can be set only for still
images that are recorded to the card.
bookmyu1060SWenA.indb41bookmyu1060SWenA.indb41 2008/07/0120:46:552008/07/0120:46:55