Olympus µ-1070 - Using OLYMPUS Master 2; System requirements and installation of OLYMPUS Master 2; Connecting the camera to a computer; Starting OLYMPUS Master 2

46 EN
Using OLYMPUS Master 2
System requirements and
installation of OLYMPUS
Master 2
InstalltheOLYMPUSMaster2softwareby
referringtotheincludedinstallationguide.
Connecting the camera to a
computer
1 Make sure the camera is turned off.
Themonitorisoff.
Thelensbarrierisclosed.
2 Connect the camera to a computer.
Thecameraautomaticallyturnson.
 LocatethepositionoftheUSBportby
referringtoyourcomputer’sinstructions
manual.
●
●
●
3 Use CE to select [PC], and press
the x button.
Thecomputerautomaticallydetectsthecameraas
anewdeviceontherstconnection.
Windows
Afterthecomputerdetectsthecamera,a
messageindicatingthecompletionofthe
settingappears.Conrmthemessageand
click“OK”.Thecameraisrecognizedasa
removabledisk.
Macintosh
WheniPhotostarted,exitiPhotoandstart
OLYMPUSMaster2.
 Whilethecameraisconnectedtothe
computer,shootingfunctionsaredisabled.
 Connectingthecameratoacomputerviaa
USBhubmaycauseunstableoperation.
 When[MTP]issetfortheSubmenuthat
appearsbypressingDafterselecting[PC]
inStep3,imagescannotbetransferredtoa
computerusingOLYMPUSMaster2.
Starting OLYMPUS Master 2
1 Double-click the OLYMPUS Master 2
icon.
Windows
appearsonthedesktop.
Macintosh
appearsintheOLYMPUSMaster2folder.
Browsewindowappearsafterstartingthe
software.
 WhenyoustartOLYMPUSMaster2forthe
rsttimeafterinstallation,“DefaultSettings”
and“Registration”screensappear.Follow
theinstructionsonthescreen.
●
●
EASY PRINT
USB
SET
OK
EXIT
CUSTOM PRINT
PC
USBcable(supplied)
Multi-connector
Connectorcover
Opentheconnector
coverinthedirection
ofthearrow.