Olympus µ-1070 - Printing; Direct printing (PictBridge*1); Printing images at the printers standard settings [EASY PRINT]

41 EN
Printing
2 Turn on the printer, and then
connect the printer and camera.
3 Press the < button to start printing.
4 To print another image, use FD
to select an image, and press the <
button.
To exit printing
Afteraselectedimageisdisplayedonthe
screen,disconnecttheUSBcablefromthe
cameraandprinter.
PRINTEXIT
Direct printing (PictBridge
*1
)
ByconnectingthecameratoaPictBridge-
compatibleprinter,youcanprintimagesdirectly
withoutusingacomputer.
TondoutifyourprintersupportsPictBridge,
refertotheprinter’sinstructionmanual.
*1
 PictBridgeisastandardforconnectingdigital
camerasandprintersofdifferentmakersand
printingoutpicturesdirectly.
 Theprintingmodes,papersizes,andother
parametersthatcanbesetwiththecamera
varydependingontheprinterthatisused.
Fordetails,refertotheprinter’sinstruction
manual.
 Fordetailsontheavailablepapertypes,
loadingpaper,andinstallinginkcassettes,
refertotheprinter’sinstructionmanual.
Printing images at the
printer’s standard settings
[EASY PRINT]
1 Display the image to be printed on
the monitor.
 “Viewingimages”(p.15)
 Printingcanalsobestartedwhenthe
cameraisturnedoff.AfterperformingStep
2,useCEtoselect[EASYPRINT],and
pressthexbutton.UseFDtoselectan
image,andproceedtoStep3.
OK
PC/CUSTOM PRINT
EASY PRINT START
<button
Connectorcover
Openthe
connectorcover
inthedirectionof
thearrow.
USBcable(supplied)
Multi-connector