EasyManua.ls Logo

Olympus µ-1070 - Viewing the image immediately after shooting [REC VIEW]; Resetting the file name numbers of pictures [FILE NAME]; Adjusting the CCD and adjusting the image processing function [PIXEL MAPPING]

Olympus µ-1070
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
EN
Viewing the image immediately after
shooting [REC VIEW]
E
SETUPRECVIEW
Submenu 2 Application
OFF
Theimagebeingrecordedisnot
displayed.Thisallowstheuser
toprepareforthenextshotwhile
followingthesubjectinthemonitor
aftershooting.
ON
Theimagebeingrecordedis
displayed.Thisallowstheuserto
makeabriefcheckoftheimage
thatwasjusttaken.
Evenwhensetto[ON],youcanresume
shootingwhiletheimageisbeingdisplayed.
Resetting the le name numbers of
pictures [FILE NAME]
E
SETUPFILENAME
Submenu 2 Application
RESET
Thisresetsthesequentialnumber
forthefoldernameandlename
wheneveranewcardisinserted.
*1
Thisisusefulwhengrouping
imagesonseparatecards.
AUTO
Even
whenanewcardisinserted,
thiscontinuesthenumberingfor
thefoldernameandlenamefrom
thepreviouscard.Thisisusefulfor
managingallimagefoldernames
andlesnameswithsequential
numbers.
*1
Thenumberforthefoldernameisresetto100,and
theoneforthelenameisresetto0001.
Adjusting the CCD and adjusting
the image processing function
[PIXEL MAPPING]
E
SETUPPIXELMAPPING
Thisfunctionhasalreadybeenadjusted
atfactoryshipping,andnoadjustmentis
neededrightafterpurchase.Approximately
onceayearisrecommended.
Forbestresults,waitatleastoneminute
aftertakingorviewingpicturesbefore
performingpixelmapping.Ifthecamerais
turnedoffduringpixelmapping,besureto
performitagain.
To adjust the CCD and the image
processing function
Pressthexbuttonwhen[START]
(Submenu2)isdisplayed.
ThecamerachecksandadjuststheCCDandthe
imageprocessingfunctionatthesametime.
Month:1toC
(A=October,
B=November,
C=December)
Day:
01to31
Pmdd
Foldername Foldername Filename
DCIM
100OLYMP
999OLYMP
Pmdd0001.jpg
Pmdd9999.jpg
Automatic
numbering
Automatic
numbering

Related product manuals