Olympus µ-1070 - Adjusting the brightness of the monitor []; Setting the date and time for another time zone [DUALTIME]

39 EN
Make the settings for the functions while referring to “Using the Menu” (p. 3).
Setting the date and time for another
time zone [DUALTIME]
E
SETUPDUALTIME
 When[DUALTIME]issetto[ON],thedate
andtimesethereareusedinimagele
names,datedprintsandotherdata.
Submenu 2 Submenu 3 Application
OFF —
Switchestothedateand
timesetin[
X].
ON
(Proceeds
to
thesetting
screen
*1
.)
Thedateand
timesettingsfrom
[DUALTIME]areusedin
lenames,datedprints
andotherdata.
*1
 Thesettingprocedureisidenticaltothatin“Setting
thedateandtime”(p.13).
 Thedatedisplayorderisthesameasthat
setwith[X].
Adjusting the brightness of the monitor
[s]
E
SETUPs
To adjust the monitor brightness
1UseCEtoadjustthebrightnesswhile
viewingthescreen,andthenpressthex
button.
s
SET
OK
MENU
BACK
Setting the date and time [X]
E
SETUPX
 “Settingthedateandtime”(p.13)
To select the date and time display
order
1PressDaftersettingMinute,anduse
CEtoselectthedatedisplayorder.
2009 08 26 12 30
X
Y M
Y M D
D TIME
MENU
CANCEL
Dateorder