Olympus MU-1 - Preparation and Inspection of the Endoscope and Disinfectant Container

Chapter 3 Preparation and Inspection
15
MAINTENANCE UNIT MU-1
3.3 Preparation and Inspection of the Endoscope
and Disinfectant Container
The Fiberscope Adapter (AC10-S) is not waterproof. Ensure
it is removed before immersing the OES Fiberscope in a
solution.
Leakage Testing
Refer to the instruction manuals of the Leakage Tester and endoscope for
directions on Leakage Testing.
Remove water from the Air/Water Channel (For endoscope
with Air/Water channel only)
1.
When using the OES Fiberscope, remove the Fiberscope Adapter from the
Light Guide Connector (if used).
2. Remove the Air/Water Valve from the endoscope and replace it with the AW
Channel Cleaning Adapter (see Figure 3.4).
Figure 3.4