Olympus OmniScan MX2 User Manual

DMTA-20015-01EN [U8778402] — Rev. J
January 2014
OmniScan MX and MX2
User’s Manual
This instruction manual contains essential information on how to use this Olympus product safely and effectively.
Before using this product, thoroughly review this instruction manual. Use the product as instructed.
Keep this instruction manual in a safe, accessible location.

Olympus OmniScan MX2 Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Phased Array	Yes
UT	Yes
Applicable Probes	Phased array, conventional UT
Display	8.4-inch sunlight-readable color LCD touchscreen
Storage Temperature	-20 °C to 60 °C
Battery Type	Lithium-ion battery
Languages	English, French, Spanish, German, Chinese, Japanese
Data Storage	Internal
Connectivity	USB, Ethernet

Summary

Labels and Symbols

Important Information — Please Read Before Use

Intended Use

Specifies the intended applications for the OmniScan MX and MX2 instruments.

Instrument Compatibility

Ensures proper functioning by verifying compatibility with ancillary equipment.

Safety Information

Details safety symbols, signal words, notes, and general safety guidelines.

Warnings and Precautions

Outlines critical warnings and precautions for safe operation and battery handling.

Warranty and Technical Support

Provides information on product warranty and how to obtain technical assistance.

1. Overview of the Equipment (OmniScan MX2)

1.1 Front Panel of the OmniScan MX2

Describes the controls and indicators on the front panel of the OmniScan MX2.

1.2 Right Side Panel

Details the input and output ports located on the right side panel.

1.3 Left Side Panel

Details the computer interface ports on the left side panel for connectivity.

1.4 Top Panel

Describes the connectors located on the top panel of the instrument.

1.5 Rear Panel

Describes the rear panel, primarily related to the acquisition module.

2. Basic Operation (OmniScan MX2)

2.1 Turning On and Off the OmniScan MX2

Explains the procedure for powering the OmniScan MX2 unit on and off.

2.4 Power Supply Management

Covers managing power from batteries and DC adaptor for the instrument.

2.5 Peripheral Connection

Details the connection of various peripherals to the OmniScan MX2.

2.6 OmniScan MX2 Software Installation

Provides instructions for installing the OmniScan MX2 software.

3. Maintenance (OmniScan MX2)

3.1 Preventative Maintenance

Outlines minimal preventative maintenance tasks for the instrument.

3.2 Instrument Cleaning

Provides procedures for cleaning external surfaces like casing and screen.

3.3 Replacing the Touch-Screen Protector

Details the steps for replacing the touch-screen protective film.

4. Troubleshooting (OmniScan MX2)

4.1 Start-Up Problems

Addresses issues encountered when the OmniScan MX2 fails to start.

4.3 Battery Charging Problems

Helps resolve issues where batteries do not charge correctly.

4.4 Battery Life Problems

Provides solutions for reduced battery performance or charge duration.

4.5 Memory Card Problems

Addresses issues related to reading or writing data to the memory card.

5. Specifications (OmniScan MX2)

6. Connector References (OmniScan MX2)

6.1 Serial Connector

Technical description and pinout for the serial connector.

6.2 Scanner Interface Connector

Technical description and pinout for the scanner interface connector.

6.3 Scanner Interface Adaptor

Details the scanner interface adaptor and its pinout.

6.4 Alarm and I/O Connector

Technical description and pinout for the alarm and I/O connector.

OmniScan MX

Introduction

Provides an overview of the OmniScan MX instrument and its capabilities.

OmniScan MX Features

Lists the key features and technologies supported by the OmniScan MX.

7. Overview of the Equipment (OmniScan MX)

7.1 Front Panel of the OmniScan MX

Describes the controls and indicators on the front panel of the OmniScan MX.

7.2 Right Side Panel

Details the input and output ports on the right side panel.

7.3 Left Side Panel

Details the computer interface ports on the left side panel.

7.4 Top Panel

Describes the connectors located on the top panel.

7.5 Rear Panel

Describes the rear panel, related to the acquisition module.

8. Basic Operation (OmniScan MX)

8.1 Turning On and Off the OmniScan MX

Explains the procedure for powering the OmniScan MX unit on and off.

8.2 Power Supply Management

Covers managing power from batteries and DC adaptor for the instrument.

8.3 Peripheral Connection

Details the connection of various peripherals to the OmniScan MX.

8.4 OmniScan Software Installation

Provides instructions for installing the OmniScan software.

9. Maintenance (OmniScan MX)

9.1 Preventative Maintenance

Outlines minimal preventative maintenance tasks for the instrument.

9.2 Instrument Cleaning

Provides procedures for cleaning external surfaces like casing and screen.

10. Troubleshooting (OmniScan MX)

10.1 Start-Up Problems

Addresses issues encountered when the OmniScan MX fails to start.

10.3 Battery Charging Problems

Helps resolve issues where batteries do not charge correctly.

10.4 Battery Life Problems

Provides solutions for reduced battery performance or charge duration.

10.5 Memory Card Problems

Addresses issues related to reading or writing data to the memory card.

10.6 Headphone or Speaker Problems

Helps resolve issues with audio output devices.

10.7 Video Input Problems

Helps resolve issues with the video input functionality.

10.8 Video Output Problems

Helps resolve issues with the video output functionality.

10.9 Networking Problems

Helps resolve issues with Ethernet communication.

10.10 USB Peripheral Problems

Helps resolve issues with USB peripheral functionality.

10.11 Boot Problems

Addresses issues preventing the instrument from booting correctly.

11. Specifications (OmniScan MX)

12. Connector References (OmniScan MX)

12.1 Serial Connector

Technical description and pinout for the serial connector.

12.2 Scanner Interface Connector

Technical description and pinout for the scanner interface connector.

12.3 Alarm and I/O Connector

Technical description and pinout for the alarm and I/O connector.

Appendix A: Compatibility Tables

Table 27 Module compatibility

Lists module compatibility with OmniScan MX2 and OmniScan MX.

Table 28 OmniScan MX2 software compatibility

Details software compatibility for OmniScan MX2 acquisition modules.

Table 29 OmniScan MX software compatibility

Details software compatibility for OmniScan MX acquisition modules.

Appendix B: Acquisition Module Description and Replacement Procedures

B.1 General Specifications

Provides general specifications common to acquisition modules.

B.3 Replacement Procedure

Outlines the procedure for replacing an acquisition module.