DMTA-20015-01EN [U8778402], Rev. J, January 2014
Labels and Symbols
1
Labels and Symbols
Safety-related labels and symbols are attached to the instrument at the locations
shown in Figure i-1 on page 1, Figure i-2 on page 2, and Figure i-3 on page 2. If any or
all of the labels or symbols are missing or illegible, please contact Olympus.
Figure i-1 The OmniScan MX2
Location of rating label
(see Table 1 on page 3)
Membrane
vent label
Identification
label
To Next Page
Loading...
