Olympus OmniScan MX2 - Table 28 Omniscan MX2 Software Compatibility; Table 29 Omniscan MX Software Compatibility

DMTA-20015-01EN [U8778402], Rev. J, January 2014
Appendix A 124
The software versions mentioned in Table 28 on page 124 and Table 29 on page 124
were the versions available at the time of the publication. Subsequent qualified
versions will also be compatible.
OMNI-M2-PA16128 U8100122 Yes No
OMNI-M2-PA32128 U8100123 Yes No
OMNI-M2-PA32128PR U8100145 Yes No
OMNI-M2-UT-2C U8100131 Yes No
Table 28 OmniScan MX2 software compatibility
Module Acquisition Analysis
UT
MXU 3.1R3
a
TomoView 2.10R5 with OSTV 3.0
a. Not compatible with version later than 3.1.
OmniPC 3.1R3
a
TomoView 2.10R5
PA
MXU 4.1
b
TomoView 2.10R5 with OSTV 3.0
b. MXU 3.2 and OmniPC 3.2 are also compatible.
OmniPC 4.1
b
TomoView 2.10R5
UT2
MXU 4.1 OmniPC 4.1
b
TomoView 2.10R5
PA2
MXU 4.1
b
OmniPC 4.1
b
TomoView 2.10R5
Table 29 OmniScan MX software compatibility
Module Acquisition Analysis
UT MXU 2.0R27
TomoView 2.10R5 with OSTV 1.7
a
a. Not compatible with version later than 3.1.
OmniPC 3.1R3
TomoView 2.10R5
PA MXU 2.0R27
TomoView 2.10R5 with OSTV 1.7
a
OmniPC 4.1
b
TomoView 2.10R5
Table 27 Module compatibility (continued)
Module Model Part Number OMNI-MX2 OMNI-MX