EasyManua.ls Logo

Olympus OmniScan MX2 - 4.5 Memory Card Problems

Olympus OmniScan MX2
228 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DMTA-20015-01EN [U8778402], Rev. J, January 2014
Basic Operation
41
2.4.8 Warnings on Battery Use
Carefully read and observe the following warnings on battery use.
Do not open, crush, or perforate batteries; doing so could cause injury.
Do not incinerate batteries. Keep batteries away from fire and other sources of
extreme heat. Exposing batteries to extreme heat (over 80 °C) could result in an
explosion or personal injury.
Do not drop, hit, or otherwise abuse a battery, as doing so could expose the cell
contents, which are corrosive and explosive.
Do not short-circuit the battery terminals. A short circuit could cause injury and
severe damage to a battery, making it unusable.
Do not expose a battery to moisture or rain; doing so could cause an electric
shock.
Only use the OmniScan MX2 or an external charger approved by Olympus to
charge the batteries.
Do not recharge a battery unless the indicators light up when the capacity check
button on the battery is pressed. Doing so could be dangerous.
Do not store batteries that have less than 40 % remaining charge. Recharge
batteries from 40 % to 80 % capacity before storing them.
During storage, keep the battery charged to between 40 % and 80 %.
Do not leave batteries in the OmniScan MX2 during instrument storage.
2.5 Peripheral Connection
This section explains the peripherals that can be used with the OmniScan MX2.

Table of Contents

Other manuals for Olympus OmniScan MX2

Related product manuals