OmniScan MX2 — Getting Started Guide 1
Intended Use
The OmniScan MX2 is designed to perform nondestructive inspections of industrial and commercial
materials. Do not use the OmniScan MX2 for any purpose other than its intended use.
Instruction Manual
Before use, thoroughly review the OmniScan MX and MX2 User’s Manual and the OmniScan MXU
Software User’s Manual, and use the product as instructed. The user’s manuals contain essential
information on how to use this Olympus product safely and effectively. Keep this guide and the user’s
manuals in a safe and accessible location. The PDF versions of the OmniScan MX2 User’s Manual and
OmniScan MXU Software User’s Manual are also available on the documentation USB drive that is
shipped with the OmniScan MX2, or can be downloaded at www.olympus-ims.com.
Safety Signal Words
Indicates an imminently hazardous situation calling attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in death or serious personal injury
Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which,
if not correctly performed or adhered to, could result in death or serious personal injury.
Indicates a potentially hazardous situation calling attention to a procedure, practice, or the like, which,
if not correctly performed or adhered to, could result in minor or moderate personal injury, material
damage, particularly to the product, destruction of part or all of the product, or loss of data.
OmniScan MX2
Getting Started Guide
To Next Page
General
