5. Names and Functions of Various Compo-
Hook
Used when the maintenance unit is
hung on a wall.
The included screw is used to install
this hook near a sink if necessary.
Scope socket
An endoscope or leak tester is
connected and air is supplied
through the connecter.
Power supply switch
Pushing the top will turn on the power
supply and the power supply switch
lamp will light at the same time. The
pump will start to operate and air will
come out of the hole at the bottom of
the scope socket.
Ventilation hole
Suction disk
Hangers (on both sides)
Hangers are used to hang the
maintenance unit on the hook or the
chemical tank (MB-264) on the
maintenance unit.
Either the left or right hanger can be
used.
Screw x 2
To Next Page
Loading...
