– 8 –
20 Remove stand F.
Figure 21
21 Remove stand F and exhaust air by rotating the air outlet plug
(pink) counterclockwise until the air jack can be removed.
Figure 22
• When exhausting air, be careful not to have your hand or an object caught by the caster.
• Exhaust air slowly by gradually opening the plug. If it is opened abruptly, the product may fall suddenly.
22 Remove the air jack.
23 Remove the protective sheet.
Figure 23
24 Cut the tape (on 4 corners) by the cutter from the cap removed in
Step 2, and open the cap.
Figure 24
To Next Page