44
Chapter 3 Cleaning, Disinfection and Sterilization Procedures
OSF-3 ENDOSCOPE REPROCESSING MANUAL
Steam Sterilization (Autoclaving)
After cleaning as described in “Manual Cleaning” on page 40, steam sterilize
according to the instructions given below.
1. Before sterilization, the parts or equipment must be thoroughly cleaned and
dried. Residual moisture inhibits sterilization.
2. Seal the individual parts or equipment in packages appropriate for steam
sterilization (autoclaving) according to your hospital’s protocol.
3. Steam sterilize the instrument according to the parameters described in
Section 2.6, “Steam Sterilization (Autoclaving) of Accessories” and the
sterilizer manufacturer’s instructions.
4. Following steam sterilization (autoclaving), let all components gradually cool
down to room temperature. Sudden changes in temperature may damage
the instruments.
To Next Page
Loading...
Need help?
General
