EN 21
EN
Make sure the camera is loaded properly
Check the following points before sealing the Case.
• Is the digital camera loaded properly?
• Are silica gel bags inserted all the way?
When the silica gel bags are not inserted correctly, it causes entrapment
when closing the rear lid.
• Is the O-ring attached properly to the opening on the Case?
• Is there any dirt or foreign matter on the O-ring or the O-ring contact
surface on the front lid?
Silica gel bags
PT-057_EN.book Page 21 Friday, November 21, 2014 10:13 AM
To Next Page
Loading...
