EN 32
EN
CAUTION
1 Do not disassemble or modify this product. This may cause water
leakage or defect. In case of the loss of image data caused by
disassembly, repair or modifi cation etc. by any party other than
those appointed by OLYMPUS CORPORATION, we shall bear no
responsibility for damage.
2 Use or storage of the product at the following locations may cause
defective operation, trouble, damage, fi re, internal clouding, or water
leakage. This should be avoided.
• Locations reaching high temperatures such as those under direct
sunlight, in an automobile, etc.
• Locations close to fi re
• Water depths in excess of 45 m
• Locations subject to vibrations
• Locations with high temperature and humidity or with severe
temperature changes
• Locations with volatile substances
3 Opening and closing at locations with much sand, dust, or dirt may
impair the waterproof characteristic and cause water leakage. This
should be avoided.
4 This product is not a case to soften impacts to the camera inside the
product. When this product with a digital camera inside it is subjected
to impacts or heavy objects are placed onto it, the digital camera
may become damaged. Please handle it with suffi cient care.
5 Do not use the following chemicals for cleaning, corrosion
prevention, prevention of fogging, repair or other purposes. When
these are used for the Case directly or indirectly (with the chemicals
in vaporized state), they may cause cracking under high pressure or
other problems.
To Next Page
Loading...
