Olympus PT-058 - PT-058 Case Preparations and Setup

EN 36
EN
1. Preparations
Check the contents of the package
Check that all accessories are in the box.
Contact your dealer if accessories are missing or damaged.
• Optical fi ber
cable adapter
(PFCA-03)
• Silicone grease
(PSOLG-2)
• Silica gel 1g (5)
(SILCA-5S)
• Monitor hood
(PFUD-08)
(on the body)
• Monitor hood
strap
• Lens cap
(PRLC-14)
• Hand strap
• O-ring remover
• Antirefl ective ring
(POSR-053)
• Instruction manual
(this manual)
• Case body
(Check that the O-ring (POL-058) is installed)
After purchase, be sure to do maintenance even in brand-new condition. Neglecting the
maintenance may become the cause of water leakage.
For how to maintenance the case, refer to P.56.
• Optical fi ber
cable insertion
slot cap (2)