CMOS color camera SC50
20
5Care and maintenance
When correctly handled, the SC50 camera has a long life span and is to a large
extent maintenance-free. The full functionality is assured when you observe the care
instructions.
Cleaning the protective glass
To clean the camera's protective glass, use a common blower bulb to blow dust
away and wipe it gently with cleaning paper (or clean gauze).
In the case of fingerprints or oil smudges on the protective glass, wipe it with clean
gauze moistened with pure alcohol.
Cleaning the housing
Parts other than the glass components should be cleaned by wiping with a clean
cloth. Do not use organic solvents to remove major stains. Use a soft cloth moist-
ened with a neutral detergent solution.
Danger of fire when using alcohol!
Alcohol is highly flammable and can cause fires.
Make absolutely sure that the alcohol doesn't come into contact with open flames
or electric components.
Do not dismantle any parts!
The camera is made up of parts that are easily damaged and their disassembly
can quickly cause a malfunction or reduced performance.
Therefore, do not dismantle any parts of the camera.
To Next Page
Loading...
