SOLTIVE™ Premium / Pro Quick Reference Guide 9
Adjust the aiming beam
n Select the aiming beam button
on the treatment screen.
n The following screen allows the aiming
beam intensity to be adjusted. The
aiming beam provides three options:
blinking emission, continuous
emission, no emission.
Laser parameter adjustment
n Select the appropriate treatment,
preset, or manual mode from
on the Home Screen.
n Press the touch screen to adjust
the parameters on a selected mode.
n Adjust the Pulse Energy or Frequency
to match the desired clinical effect
by sliding your finger over the
parameter, tapping the -/+ buttons,
or holding down the -/+ buttons.
n There are three options for Pulse
Width: long, medium, or short. Select the desired Pulse Width by
pressing the Pulse Width indicator button to toggle between settings.
n Select the Home button to choose a different treatment mode.
Laser Operation
To Next Page
Loading...
