19
En
Using the provided USB cable, you may connect your camera directly to a PictBridge
compatible printer such as the Olympus P-11 to make prints. You can print a picture
with simple operations.
1 In playback mode, display the picture you wanto to print out on the monitor.
2 Connect one end of the provided USB cable into the camera’s multi-connector
and the other end into the printer’s USB connector.
3 Press the < button.
Printing starts.
When you are finished, disconnect the USB cable
from the camera with the picture selection screen
displayed.
Direct printing (PictBridge)
USB Cable
Multi-Connector< Button
OK
PC / CUSTOM PRINT
EASY PRINT START
d4268_69_oima_e_basic_00_bookfile_7.book Page 19 Friday, August 5, 2005 4:21 PM
To Next Page
Loading...
