Olympus SP-565 - Changing the Display Language

13 EN
4
As in steps 2 and 3, use 789:
and the o button to set [M]
(month), [D] (day), [TIME] (hours
and minutes) and [Y/M/D] (date
order).
For precise time setting, press the o button
as the time signal strikes 00 seconds.
To change the date and time, make the
setting from the menu. [X (Date/time)]
(p. 59)
To check the date and time
Press the g button while the camera is
turned off. The current time and alarm time
are displayed for approx. 3 seconds.
Changing the display language
The language for the menu and error messages
displayed on the monitor/viewfi nder is selectable.
1
Set the mode dial to a position other
than R.
2
Press the m button, and press
789: to select [x SETUP].
SCN
SCN
RESET
RESET
PANORAMA
PANORAMA
CAMERA
MENU
CAMERA
MENU
SILENT
MODE
SILENT
MODE
MENU
EXIT SET
OK
IMAGE
QUALITY
IMAGE
QUALITY
SETUP
SETUP
3
Press the o button.
1
2
3
4
5
BACKUP
NORMAL
SETUP
ENGLISH
PW ON SETUP
MENU COLOR
MEMORY FORMAT
MENU
EXIT SET
OK
4
Use 78 to select [W] and
press the o button.
5
Use 789: to select your
language and press the o button.
6
Press the m button.
book_d4374_en.indb 13book_d4374_en.indb 13 18/07/2008 13:39:0718/07/2008 13:39:07