Olympus SP-565 - Page 62

62 EN
Registering a set of shooting settings under my mode labels [MY MODE SETUP]
x SETUP X MY MODE SETUP
By referring to the “Application” column, select the registration method (submenu 2) and the desired
my mode label (submenu 3) and then adjust any settings.
Submenu 2 Submenu 3 Submenu 4 Application
CURRENT
s
MY MODE 1/
E
MY MODE 2/
c
MY MODE 3/
d
MY MODE 4
SET/CANCEL
[SET] sets the current menu function settings to the
selected my mode label (s/E/c/d).
RESET
RESET/CANCEL
[RESET] returns the functions in the selected my
mode label to their defaults.
CUSTOM
(Register functions
individually)
The user can make any changes to a selected my
mode label setting.
When [CUSTOM] is selected, available function settings for the my mode registrations are follows;
[P/A/S/M/f] (p. 17 to 20)•
[DRIVE] (p. 34)•[
>
] (p. 39)•
[F] (p. 23)•
[FINE ZOOM] (p. 35)• [PICTURE MODE] (p. 39)•
[FNo.] (p. 17, 18)• [DIGITAL ZOOM] (p. 35)• [SHARPNESS] (p. 39)•
[SHUTTER] (p. 17, 18)• [METERING] (p. 35)• [CONTRAST] (p. 40)•
[FLASH MODE] (p. 22)• [AF MODE] (p. 36)• [SATURATION] (p. 40)•
[&] (p. 24)•
[FOCUS MODE] (p.36)• [NOISE REDUCT.] (p. 40)•
[Y] (p. 24)•
[FULLTIME AF] (p. 37)• [TIMELAPSE] (p. 41)•
[f] (p. 22)•
[AF PREDICT] (p. 37)•[
1
] (p. 41)•
[MONITOR]• [AF ILLUMINAT.] (p. 37)• [INFO] (p. 25)•
[ZOOM]• [IMAGE STABILIZER] (p. 37)• [FRAME ASSIST] (p. 61)•
[IMAGE QUALITY] (p. 31)•[
w
] (p. 38)•[
u
] (p. 61)•
[WB] (p. 32)•[
Q
FLASH] (p. 38)•
[ISO] (p. 33)•[
R
] (p. 39)•
To select the display device used at
camera startup [MONITOR]
Select [CUSTOM] (submenu 2) X desired
my mode label (submenu 3) X [MONITOR]
(submenu 4), and then the display device
that shows the saved image or shooting
standby screen ([LCD] or [EVF]).
To select the zoom position at camera
startup [ZOOM]
Select [CUSTOM] (submenu 2) X desired
my mode label (submenu 3) X [ZOOM]
(submenu 4), and then a preset focal length
(angle of view) ([26mm], [50mm], [150mm],
[300mm] or [520mm]).
The focal length selected by [ZOOM] is
based on the equivalent value for 35mm
cameras.
To select the information display at
camera startup [INFO]
Select [CUSTOM] (submenu 2) X desired
my mode label (submenu 3) X [INFO]
(submenu 4), and then the desired
information display format at camera
startup ([OFF] (startup the camera with no
information), [ON] (startup the camera with
normal display), [FRAME ASSIST] (startup
the camera with grid) or [u] (startup the
camera with histogram)). “Changing the
shooting information display” (p. 25)
book_d4374_en.indb 62book_d4374_en.indb 62 18/07/2008 13:39:2418/07/2008 13:39:24