17
En
Using the provided USB cable, you may connect your camera directly to a
PictBridge compatible printer to make prints. You can print a picture with simple
operations.
1 In playback mode, display the picture you want to print out on the
monitor.
2 Connect one end of the provided USB cable into the camera’s
multi-connector and the other end into the printer’s USB connector.
3 Press <.
Printing starts.
When printing is finished, disconnect the USB
cable from the camera with the picture
selection screen displayed.
Direct Printing (PictBridge)
Multi-connector
USB cable
Connector cover
< Button
OK
PC
/
CUSTOM PRINT
EASY PRINT START
d4364_e_basic_00_bookfile.book Page 17 Friday, December 21, 2007 6:46 PM
To Next Page
Loading...
