Brightening
the
subject
against
backlight
(SHADOW
ADJ·1)
The camera finds a person's face that has been
darkened by backlight and makes it appear
brighter.
'1
Shadow adjustment technology
1 Press the
Ii!·:
button.
2 Use
08
to select [ON], and press
the
@ button to set.
3 Point the camera toward the
subject. Check the frame appearing
around the face detected by the
camera, and then press the shutter
button to take the picture.
(])
For some subjects, the frame may not
appear or may take some time to appear.
(fJ [METERING]
(p.
33)
is
automatically
fixed to [ESP). and [AF MODE] (p. 34)
is
automatically fixed to [FACE DETECT].
t'l,r,
[~]
is automatically switched to
[Q).
Also,
in
sequential shooting, this function
is
applied only to the first frame. [DRIVE]
(p.32)
22
EN
Using
the
flash
The flash functions can be selected to best
match the shooting conditions and render the
desired image.
1 Press the
~
button to flip up the
built-in flash.
"'H~-
~
button
(])
The flash settings cannot be adjusted with
the flash closed.
To
turn off the flash
Press the flash down back into the camera.
This sets to
@ (FLASH OFF) mode.
2 Press 8.
To Next Page
Loading...
