Olympus SP-590UZ - Page 63

Resetting the print reservation
data for selected images
1 Follow steps 1 and 2 of "Resetting
all print reservation data" (p. 62).
2 Use @J[]J to select [~], and press
the @ button.
3 Use @J[]J to select [KEEP] and
press the @ button.
4 Use §~ to select the image with
the print reservation you want to
cancel. Use @J[]J to set the print
quantity to "0".
5 If necessary, repeat step 4, and then
press the @ button when finished.
6 Use @J[]J to select the [(2)] (date
print) screen option, and press the
@ button .
• The settings are applied to the remaining images
with the print reservation data.
7 Use @J[]J to select [SEn, and press
the @ button.
EN 63