ng
OLYMPUS
Master
2
System
requirements
and
installation
of
OLYMPUS
Master
2
Install
the
OLYMPUS
Master
2
software
referring
to
the
included
installation
guide.
Connecting
the
camera
to
a
computer
1 Make sure the camera is turned off.
• The monitor
is
off.
• The lens
is
retracted.
2 Connect the camera to a computer.
• The camera automatically turns
on.
Windows
After the computer detects the camera, a
message indicating the completion
of
the
setting appears. Confirm the message and
click "OK". The camera is recognized as a
removable disk.
Macintosh
When iPhoto starts, exit iPhoto and start
OLYMPUS Master
2.
ft) While the camera is connected to the
computer, shooting functions are disabled.
(])
Connecting the camera to a
computer
via a
USB
hub
may
cause unstable operation.
(/)
When
[MTPj
is set for the submenu that
appears
by
pressing
E)
after selecting [PC]
in
step
3,
images cannot be transferred to a
computer using
OLYMPUS
Master 2.
Multi-connector
SET.~
Starting
OLYMPUS
Master
2
1 Double-click the OLYMPUS Master 2
icon.
Windows
it
appears on the desk top.
Macintosh
·11
appears
in
the OLYMPUS Master 2 folder.
• Browse window appears after starting the
software.
o
When
you start OLYMPUS Master 2 for the
first time after installation, "Default Settings"
and "Registration" screen appear. Follow the
instructions on the screen.
Locate the position
of
the USB port
by
referring to
your
computer instructions
manual.
3 Use 0000 to select [PCl, and press
the
@ button.
• The computer automatically detects the camera
as
a new device
on
the first connection.
64
EN
To Next Page
Loading...
