Olympus SP-820UZ - Page 24

24
EN
Exposure compensation Compensates the brightness (appropriate exposure) adjusted by the camera.
z to y
Value
Set a larger negative (–) value to adjust darker, or a larger positive (+) value to adjust
brighter.
White balance Sets an appropriate color scheme for the light of the shooting scene.
e
WB Auto The camera automatically adjusts the white balance.
f
Sunny Suitable for shooting outdoors under a clear sky.
g
Cloudy Suitable for shooting outdoors under a cloudy sky.
h
Incandescent Suitable for shooting under tungsten lighting.

Fluorescent Suitable for shooting under white fl uorescent lighting.

One Touch 1 For manually adjusting the white balance according to the light when shooting. Set a piece
of white paper or other white object so that it fi lls the entire screen, and press the 
button to set the white balance.

One Touch 2
ISO
*3
Sets the ISO sensitivity.
l
ISO Auto The camera automatically sets the sensitivity with priority on image quality.
m
High ISO Auto The camera automatically sets the sensitivity with priority on minimizing blur caused by a
moving subject or by camera shake.
& to #
Value Set a smaller value to reduce noise in the picture, or a larger value to reduce blur.
Drive Sets the sequential shooting function.
o
Single One frame is shot each time the shutter button is pressed.
i
Sequential 1 The camera takes sequential shots at approximately 1.5 frames/sec.
h
Sequential 2 The camera takes up to 3 sequential shots at approximately 3 frames/sec.
c
High-Speed 1 The camera takes up to 34 sequential shots at approximately 10 frames/sec.
d
High-Speed 2 The camera takes up to 34 sequential shots at approximately 30 frames/sec.