43
EN
Connecting with a computer
System requirements
Windows : Windows XP Home Edition/
Professional (SP1 or later)/
Windows Vista/Windows 7
Macintosh : Mac OS X v10.3 or later
When using another system other than Windows XP
(SP2 or later)/Windows Vista/Windows 7, set to
[Storage].
Even if a computer has USB ports, proper operation
is not guaranteed in the following cases:
● Computers with USB ports installed using an
expansion card, etc.
● Computers without a factory-installed OS and
home-built computers
When the computer does not support SDXC cards,
a message may appear urging to format the internal
memory or card. (Formatting will completely erase all
images, so do not format.)
Set [USB Connection] in the setup menu of the camera
beforehand. (p. 37)
Connecting the camera
USB cable
(supplied)
Multi-connector
Connector
cover
When [USB Connection] is set to [Auto], connect the
camera and the computer, select [Storage] or [MTP] at
the screen for selecting the connection method, and then
press the A button.
To Next Page
Loading...
