Olympus SP-820UZ - Turning on the Camera and Making the Initial Settings

6
EN
Turning on the camera and making
the initial settings
When you turn on the camera for the fi rst time, a screen
appears enabling to set the language for the menus and
messages displayed in the monitor, and the date and time.
1
After turning the camera on with the n
button, select a language using FGHI and
press the A button.
2
Use FG to select the year for [Y].
X
MENU
Back
Y/M/D
Y M D Time
-- --
--
--
:..2012
Date and time setting screen
3
Press I to save the setting for [Y].
X
MENU
Back
Y/M/D
Y M D Time
-- --
--
--
:..2012
4
As in Steps 2 and 3, use FGHI to set
[M] (month), [D] (day), [Time] (hours and
minutes), and [Y/M/D] (date order), and then
press the A button.
For precise time setting, press the A button as the
time signal strikes 00 seconds.
5
Use HI to select the [x] time zone and
then press the A button.
●
Use FG to turn daylight saving time ([Summer])
on or off.
Seoul
Tokyo
’12.10.26 12:30
Summer