7
EN
Learning how to use the camera
● Press the n button to turn on the camera and
enter the standby mode. (Press the n button
again to turn off the camera.)
● Select the shooting mode, and press the shutter
button to shoot a still image.
● To shoot a movie, press the R button.
● Set the shooting functions using the function menu or
the setup menu.
● To view images, press the q button to switch to
playback mode.
● Set the playback functions using the setup menu.
● To return to standby mode, press the q button
again, or press the shutter button halfway down and
then release it.
● Press and hold the q button while the camera is
turned off to start up the camera in the playback mode.
● In this case, pressing the q button again sets the
camera to the standby mode.
To Next Page
Loading...
