Inserting and removing the picture card
20
Preparations
Before operating your camera
Removing the card
Open the connector cover and then open the picture card
cover.
Push the card all the way in to
unlock it, then let it return slowly.
The card will be ejected.
Releasing your finger quickly after
pushing the card in may cause it to
eject forcefully out of the slot.
Remove the card.
Do not push the card in with a hard or pointed item such as a ballpoint pen.
Never open the picture card cover while the camera is turned on. Such
action could destroy all the data on the card. Once destroyed, data cannot
be restored.
000e_kihonhen.book Page 20 Tuesday, February 10, 2004 2:30 PM
To Next Page
Loading...
