Setting
the
date
and
time
The date and time set here are used to image file
nam9S, date prints, and other data.
1 Press the
ON/OFF
button to turn on
the camera.
•
The
date
and
time setting screen
is
displayed
when
the
date
and
time
are
not
set.
•
--.-- --:--
Y/M/O
Date and time setting screen
2 Use
'\I7
LID. to select the year for [V].
@
Em
--
--
-_.
--
Y/ MID
3 Press
~
to save the setting for [V].
CANCEL.~
4 As
in
Steps 2 and
3,
use
~
LID.
~
~
and the
~
button to set [M] (month),
[0]
(day), [TIME] (hours and minutes)
and [V/M/O].
".1)
~,;;.
For precise time setting, press the
~
button as
the time signal strikes 00 seconds.
(':J
To
change the date and time, adjust the setting
from the menu. [<2)] (Date/time) (p. 40)
To
check the date and time
Press the DISP. button while the camera is
turned off. The current time is displayed for
approx. 3 seconds.
Changing
the
display
language
The language
of
the menu and error messages
displayed on the monitor is selectable.
1 Press the MENU button, and press
'@~~~
to select
[~]
(SETUP).
EXIT.~
2 Press the
~
button.
3 Use
'\D
LID. to select
[.z~)]
and press
the
~
button.
4 Use
~
LID.
~
~
to select your language
and press the
~
button.
5 Press the MENU button.
EN
13
To Next Page
Loading...
