r.~'''''ing
OLYMPUS
Master
2
System
requirements
and
installation
of
OLYMPUS
Master
2
Install the OLYMPUS Master 2 software by
referring to the included installation guide.
Connecting
the
camera
to
a
computer
1 Make sure the camera is turned off.
• The monitor
is
off
• The lens
is
retracted.
2 Connect the camera to a computer.
• The camera automatically turns
on.
Windows
After the computer detects the camera, a
message indicating the success
of
the operation
will appear. Confirm the message by clicking
"OK."
The camera
is
recognized as a removable disk.
Macintosh
When iPhoto started. exit iPhoto and start
OLYMPUS Master
2.
(f) While the camera is connected to the
computer, shooting functions are disabled.
o Connecting the
camera
to a computer via a
USB hub
may
cause unstable operation.
(!J
When
[MTPl
is set for the submenu that
appears by pressing
~
after
selecting [PCl
in
Step
3,
images
cannot
be transferred to a
computer
using
OLYMPUS
Master
2.
Open the connector cover
in
the direction of the arrow.
IIIH-~H+--
Multi-
connector
•
SEHlQID
Starting
OLYMPUS
Master
2
1 Double-click the OLYMPUS Master 2
icon.
Windows
it
appears on the desktop.
Macintosh
• appears
in
the OLYMPUS Master 2 folder.
• Browse window appears after starting the
software.
o
When
OLYMPUS Master 2 is started
for
the
first time after installation, "Default Settings"
and "Registration" screens will appear. Follow
the instructions on the screen.
Locate the position
of
the
USB
port by referring
to your computer's instructions manual.
3 Use
"I7
LE>
to select [PC], and press
the
~
button.
• The computer automatically detects the camera
as
a
new device
on
the first connection.
48
EN
To Next Page
Loading...
