Refer
to
"Using
the
Menu"
(p.
3)
when
adjusting
the
settings
of
these
functions.
Menus
for
Other
Camera
Settings
These
settings
can
be
made
from
the
shooting
mode
top
menu
or
playback
mode
top
menu.
Changing
the
display
language
[ •
.@]
»SETUP
~
•
.@
,..,
"Changing the display language"
(p.
13)
Erasing
data
completely
[MEMORY
FORMAT]/[FORMA
T]
~?
SETUP
~
MEMORY
FORMAT/FORMAT
I(JJ
Before formatting, check that no important data
is left
in
the internal memory or card.
It'!)
Non-Olympus cards and cards that have been
formatted by a computer must be formatted
with this camera before use.
Languages"
The language for the menus and
error messages displayed
on
the
monitor is selected.
" The available languages vary depending
on
the country
and/or region where the camera was purchased.
'1
Be sure to remove the card before formatting the
internal memory.
YES
NO
Completely erases the image data
in
the internal memory" or card
(including protected images).
Cancels formatting.
Setting
the
startup
display
screen
and
sound
when
the
camera
is
turned
on
[PW
ON
SETUP]
»
SETUP
~
PW
ON
SETUP
Copying
images
from
the
internal
memory
to
the
card
[BACKUP]
~f
SETUP
~
BACKUP
OFF
1
No image is displayed.
A preset image" is
displayed,
YES
Backs up image data from the
internal memory to the card.
SCREEN
2
A still image stored
in
the
internal memory or card is
registered for display. (This
option leads to the setup
screen.)
!~..,
It takes some time to back up data. Check that
the battery has sufficient power before starting
the backup, or use an AC adapter.
" This image cannot be changed.
NO Cancels the backup.
VOLUME
OFF (No
sound)/LOW/ The
vO.lume
of the startup
HIGH sound
IS selected.
To
register
a
startup
image
CD
Select
[2]
in
submenu
3
for
[SCREEN].
®
Use
e~
to
select
the
image
to
be
registered,
and
press
the
~
button.
EN
'37
To Next Page
Loading...
Need help?
General
