~'~Doting,
Playback,
and
Erasing
Shooting
with
optimum
aperture
value
and
shutter
speed
(0
mode)
3 Hold the camera, and compose the
shot.
Monitor
Horizontal grip
1 Set the mode dial to o.
In
this mode, automatic camera shooting can
be
used while also allowing changes
to
a wide
range
of
other shooting menu functions, such as
exposure compensation, white balance and so on
as needed.
2 Press the ON/OFF button to turn on
the camera.
Monitor
(standby mode screen)
C)
+
ON/OFF
.......
Number of storable still pictures
(p.
57)
o Press the ON/OFF button again to turn off
the camera.
Vertical grip
(/)
When holding the camera, take care not to
cover the flash with your fingers. etc.
4 Press the shutter button halfway
down to focus
on
the subject.
• When the camera focuses
on
the subject, the
exposure
is
locked (shutter speed
and
aperture value
are displayed),
and
the
AF
target mark changes
to
green.
• The camera was unable to focus if the
AF
target mark
flashes
red.
Try
focusing again.
Press halfway
Shutter speed
Aperture value
AF target mark
o "Focusing" (p. 52)
14
EN
To Next Page
Loading...
