ting
Direct
printing
(PictBridge*1)
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
To
find out
if
your printer supports PictBridge, refer
to the printer's instruction manual.
.,
PictBridge
is
a standard for connecting digital
cameras
and
printers of different makers
and
printing
out pictures directly.
l~1)
The printing modes, paper sizes, and other
parameters that can be set with the camera
vary depending on the printer that is used. For
details, refer to the printer's instruction manual.
~~rJ
For details on the available paper types,
loading paper, and installing ink cassettes,
refer to the printer's instruction manual.
Printing
images
at
the
printer's
standard
settings
[EASY
PRINT}
1 Display the image to be printed on the
monitor.
I~J
"Viewing images" (p. 15)
( Printing can also be started when the camera
is turned off. After performing Step
2,
use
'17
~
to select [EASY PRINT], press the
~
button.
Use
88
to select an image, and press the
~
button.
2 Turn on the printer, and then connect
the printer and camera.
Open the connector cover
in
the direction
of
the arrow.
8button
~~t--
Multi-
connector
3 Press
~
to start printing.
4
To
print another image, use
8~
to select an image, and press the
~
button.
To
exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
EN
···43······
To Next Page
Loading...
